RAW MATERIAL SPECIFICATION
As the base material of SARANACOLOR, we use Saranalume with various coating thickness and mechanical properties in accordance with the applicable Indonesian standards.
| NOMINAL THICKNESS | TOLERANCE |
| (mm) | (mm) |
| 0.20 | ± 0.010 |
| 0.25 | ± 0.025 |
| 0.30 | ± 0.030 |
| 0.35 | ± 0.030 |
| 0.40 | ± 0.040 |
| 0.45 | ± 0.040 |
| 0.50 | ± 0.500 |
| 0.60 | ± 0.500 |
| METAL COATING | MINIMUM YIELD STRENGTH | MINIMUM TENSILE STRENGTH |
| AS100 | 300 & 550 | 300 & 550 |
| AS150 | 300 & 550 | 300 & 550 |
| APPLICATION BY MATERIAL SPEC |
| G550 : Roll Formed Roofing and Walling |
| G300 : Roll Formed Roofing and Walling, Pressing |
COIL COATING
To further enchance physical and visual properties, SARANACOLOR from this pattern is assembled here as an introduction to the good qualities.
SARANACOLOR coated by a comprehensive range of amino-cured polyester-based coatings. Available for indoor or outdoor use with varying level of hardness, formability and chemical resistance properties.
SARANACOLOR offered with backing coats. Formulations giving adhesion to insulations foams, anti-pressure marking, and anti coil collapsing properties.